1 / 7Dolphin Automotive Vivaro Reversing Camera and LED Brake Light
Dolphin Automotive’s Vivaro reversing camera replaces the high-level brake light on specified Vauxhall Vivaro models from 2001 to 2014. It combines a rear-facing camera with LED brake-light bulbs and connects to a compatible monitor through composite video.
At a glance
- Replacement high-level brake light with an integrated rear camera and LED bulbs.
- The camera is designed to show the area behind the van, angled down towards the rear bumper.
- Connects to a compatible monitor with a Phono/RCA input and PAL or NTSC support.
- The camera is wired to the reversing-light feed to activate when reverse is selected. The listing also describes an optional 12v ignition-feed connection for always-on use.
Pros and cons
Pros
- Combines a replacement brake light and reversing camera in one part.
- Includes a 10 m RCA/Phono cable, a power lead and a composite adaptor cable, according to the kit description.
- Reversing guidelines can be deactivated if not wanted.
- Mirror-image view and a stated 170-degree viewing angle are specified.
Cons
- Requires a separate compatible monitor. AHD monitors are not supported.
- The camera is described as 720p quality, but the listing does not specify a pixel resolution.
Technical specifications
25 specifications| Brand | Dolphin Automotive |
|---|---|
| Vehicle service type | Opel |
| Vehicle years listed | 2001-2014 |
| Position | Rear |
| Colour | Red |
| Lens colour | clear |
| Power | 12v |
|---|---|
| Image quality | 720p Quality |
| Lens type | CMOS Lens |
| Viewing angle | 170 Degree |
| Video output | Dual NTSC & Pal Output |
| Image | Mirror Image View |
| Guidelines | Reversing Guidelines (These Can Be Deactivated If Not Required). |
| Waterproof rating | IP68 Waterproof |
| Light source | LED |
|---|---|
| Model year | 2001 |
| Special feature | Waterproof |
| Voltage | 12 Volts |
| Vehicle fitment claim | Opel / Vauxhall Vivaro From 2001 - 2014 |
|---|---|
| Other listed vehicle names | Renault Trafic & Nissan Primaster Of The Same Vintage |
| Brake-light dimensions to check | 14cm Wide and 5.5cm High |
| Monitor connection | Phono/RCA Input |
| Signal compatibility | PAL or NTSC Signal |
| AHD compatibility | It Is Not AHD Compatible. |
| Cable included | 10m RCA / Phono Cable |
What to know before buying
Listing details to confirm
Fitment is claimed for the Vauxhall/Opel Vivaro from 2001–2014 and the same-vintage Renault Trafic and Nissan Primaster. Check that the existing oval brake light is approximately 14 cm wide and 5.5 cm high, and note that the listing points later models from 2014 onwards to a different product. A compatible monitor needs a Phono/RCA input and PAL or NTSC support. The listing describes wiring to the reversing-light feed for reverse-only operation, or to a 12v ignition feed for always-on use.
Who is it for?
A good fit for
- Owners of a compatible 2001–2014 Vivaro who want a camera integrated into a replacement high-level brake light.
- Buyers who already have a monitor with a composite Phono/RCA input and PAL or NTSC support.
Less suited to
- Vehicles outside the stated fitment or with a brake light that does not match the listed shape and dimensions.
- Buyers needing a camera compatible with an AHD monitor or seeking a complete system with monitor included.

Customer reviews on Amazon
- 5 stars
60% 60% - 4 stars
18% 18% - 3 stars
10% 10% - 2 stars
6% 6% - 1 star
6% 6%
The supplied evidence contains aggregate ratings but no written customer feedback, so it does not establish specific praised features or complaints. The overall rating distribution leans positive, though a substantial share is below five stars. Treat this as limited context rather than evidence of fitment or camera performance, and check vehicle and monitor compatibility against the stated requirements.
Frequently asked questions
Which vehicles is this camera listed for?
The listing specifies the Opel/Vauxhall Vivaro from 2001 to 2014, and says it also fits the same-vintage Renault Trafic and Nissan Primaster. Confirm the existing light’s shape and dimensions before ordering.
What monitor will work with it?
The monitor needs a Phono/RCA input and PAL or NTSC support. The listing says the camera is not AHD compatible.
Does the kit include a monitor?
No monitor is specified in the kit contents. The listing says monitors come with their own mounts and compatible cabling, indicating a monitor is an additional item.
How does the camera switch on?
The camera is described as wiring to the reversing-light feed so it activates when reverse is selected. The listing also says it can be wired to a 12v ignition feed for always-on use.
























