1 / 7Dolphin Automotive Sprinter/Crafter Brake-Light Reversing Camera with 7-inch Monitor
Dolphin Automotive’s rear high-level brake-light reversing camera is listed for Mercedes-Benz Sprinter vans and VW Crafter models, with a 7-inch mirror monitor. It replaces the roof brake-light lens housing while retaining the van’s existing brake-light system. The listing gives two different viewing-angle figures, so confirm which applies to the selected camera.
At a glance
- The camera is integrated into a replacement high-level brake-light lens housing and is described as retaining the existing brake-light system.
- The listing says it is triggered by the reversing-light feed, with an ignition-feed option for always-on use.
- Reversing guidelines can be deactivated, and the camera is described as having a ball-and-socket housing for angle adjustment.
- The listing specifies a 10 m RCA cable and says the monitor version includes monitor mounts and compatible cabling.
Pros and cons
Pros
- The camera-and-monitor listing combines a reversing camera with a 7-inch mirror monitor.
- A 10 m RCA cable is stated for connecting the camera to a monitor.
- PAL/NTSC compatibility is specified, with deactivatable reversing guidelines.
Cons
- The camera is not AHD compatible, which rules it out for a setup that requires an AHD camera signal.
Technical specifications
11 specifications| Brand | Dolphin Automotive |
|---|
| Screen size | 7 Inches |
|---|---|
| Video signal | Dual PAL/NTSC compatible |
| Video connection | RCA |
| Optical sensor | CMOS |
|---|---|
| Lens type | Fixed |
| Viewing angle | 170 Degrees |
| Power | 12 Volts |
| Dimensions listed | 34L x 9W x 3.5H centimetres |
|---|---|
| Installation type | Roof Mount |
| Listed compatible devices | Monitor |
What to know before buying
- The camera is described as powering from the reversing-light feed, or alternatively from a 12 V ignition feed for continuous operation. Check that a separate monitor accepts a PAL or NTSC RCA/phono input.
Listing details to confirm
The listed fitment differs across the title and feature text: the title gives Sprinter 2007 onwards and Crafter 2007–2015, while the feature text gives Sprinter 2007–2019 and 2019 onwards, and Crafter 2007–2017. The viewing angle is also inconsistent, listed as 170 Degrees in details and 120 degrees in the camera specification. Confirm the exact vehicle fitment and camera angle for the selected listing. The stated 34 cm width and 3.5 cm height are also given as measurements to check against the van’s brake light.
Who is it for?
A good fit for
- Owners of a listed Sprinter or Crafter who want a roof brake-light replacement camera and monitor as one system.
- Buyers whose monitor accepts PAL or NTSC video over RCA and who do not need an AHD camera.
Less suited to
- Owners who need confirmed fitment for a specific Sprinter or Crafter year without checking the conflicting year ranges.
- Buyers whose display system requires AHD video.

Customer reviews on Amazon
- 5 stars
57% 57% - 4 stars
22% 22% - 3 stars
5% 5% - 2 stars
4% 4% - 1 star
12% 12%
No customer-comment summary is supplied. Aggregate ratings are mixed, with more five- and four-star ratings than lower-star ratings but a notable one-star share. These figures do not establish particular strengths, causes of dissatisfaction or performance, so buyers should treat them as limited context rather than evidence about fitment or camera quality.
Frequently asked questions
Does this kit include a monitor?
The title identifies a camera and 7-inch mirror monitor, and the feature text says monitors come with their own mounts and compatible cabling. Confirm the selected listing’s package contents.
Which Sprinter and Crafter years does it fit?
The fitment statements differ. The title lists Sprinter 2007 onwards and Crafter 2007–2015, while the feature text gives different year ranges. Confirm the exact van and brake-light dimensions before ordering.
What video connection and signal does it use?
The listing specifies an RCA connection and dual PAL/NTSC compatibility. It explicitly says the camera is not AHD compatible.
Can the camera stay on outside reversing?
The listing says it normally connects to the reversing-light feed, and can instead be wired to a 12 V ignition feed for always-on operation.
























