1 / 4Dolphin Automotive Dual Reversing Camera, 12 V
Dolphin Automotive’s dual reversing camera is a camera-only system for vehicles with a compatible monitor. Its two camera views are intended to show the area near the rear bumper and the view behind the vehicle, but the listing describes the image angles and camera sensor inconsistently.
At a glance
- Two cameras are described for separate downward and outward rear views.
- The listing says each camera has infrared LEDs and an adjustable mounting bracket.
- Camera-only configuration. A compatible monitor is needed to view the feed.
Pros and cons
Pros
- Two differently aimed camera views can help cover both the area immediately behind the bumper and the view farther back.
- The adjustable bracket lets the installer set the cameras' angles.
- The listing describes infrared LEDs for night vision and a sun and weather visor.
Cons
- This camera-only selection does not include a monitor, so it is not a complete viewing system by itself.
Technical specifications
11 specifications| Brand | Dolphin Automotive |
|---|
| Screen size | 4.3 Inches |
|---|---|
| Compatible device | Monitor |
| Sensor technology | CMOS or CCD |
| Lens type | Wide Angle |
| Listed viewing angle | 120 Degrees |
| Video quality | 720p Quality |
| Operating voltage | 12 Volts |
|---|---|
| Connector type | RCA |
| Dimensions listed | 10L x 5W x 10H centimetres |
|---|---|
| Installation type | Surface Mount |
What to know before buying
Listing details to confirm
The listing gives conflicting or uncertain technical details: it specifies CMOS or CCD in the details but CMOS in the feature text, and lists a 120-degree view while also describing 90 degrees for the outward camera. Confirm the camera-specific angles and sensor before buying. It also mentions a 4.3-inch screen despite describing this selection as camera only, so check the selected configuration. The stated 720p quality and IP68 rating appear in the feature text only. The listing says the cameras use two separate 4-pin connectors and warns that wiring can differ from cameras fitted to some motorhomes. Check the existing wiring and monitor compatibility before ordering. It describes RCA connectors elsewhere, so confirm the connection type for the selected camera.
Who is it for?
A good fit for
- Motorhome or van owners who want two rear camera views and already have a compatible monitor and wiring.
- Buyers seeking a 12 V camera with an adjustable mount and infrared LEDs.
Less suited to
- Buyers who need a complete camera-and-monitor kit.
- Owners replacing an existing camera who have not checked connector and wiring compatibility.

Customer reviews on Amazon
- 5 stars
41% 41% - 4 stars
29% 29% - 3 stars
14% 14% - 2 stars
0% 0% - 1 star
16% 16%
There is no supplied written customer feedback. The aggregate ratings are mixed, so they do not establish specific strengths, faults or reasons for satisfaction. Buyers should base compatibility decisions on the listed wiring and monitor requirements rather than infer performance from the ratings.
Frequently asked questions
Does this selection include a monitor?
It is described as camera only. The listing mentions a 4.3-inch screen in its details, so confirm the selected configuration and contents before buying.
Are the cameras compatible with an existing motorhome system?
Not necessarily. The listing says the cameras use two separate 4-pin connectors and warns that wiring may differ from existing equipment. Check your system's connections first.
What viewing angles are listed?
The details give 120 degrees, while the feature text describes 120 degrees for the downward view and 90 degrees for the outward view. Confirm the angle for each camera.
Can both camera views be shown together?
The listing says side-by-side viewing requires one of its 4.3-inch dual-screen monitor solutions. That monitor is not established as included with this camera-only selection.
























