1 / 7AEYINO MTB Hydraulic Disc Brake Set, 800 mm Front and 1500 mm Rear Hoses
Hoses: AEYINO MTB hydraulic disc brake set is described as a front-left and rear-right brake pair with different hose lengths. Its pre-bled mineral-oil system and claimed IS/PM adapter may suit a replacement or conversion, provided the hose routing and mounting fit your bike.
At a glance
- The listing specifies left-hand front braking and right-hand rear braking, with different hose lengths for each end.
- Pre-bled mineral-oil brakes are presented as ready for installation, subject to the fitting precautions in the listing.
- The listing claims semi-metallic pads, dual-piston braking and an ergonomic 3-finger lever.
Pros and cons
Pros
- Front and rear hose lengths are stated separately, helping buyers assess routing and reach before purchase.
- The advertised pre-bled mineral-oil setup avoids a bleeding step if supplied as described.
- The listed 22.2 mm handlebar fit and IS/PM adapter are relevant compatibility details for a planned installation.
Technical specifications
9 specifications| Front brake position and hose length | front brake on the left (length: 800mm/31.5inch) |
|---|---|
| Rear brake position and hose length | rear brake on the right (length: 1500mm/59.1inch) |
| Handlebar compatibility | 22.2 mm handlebars |
|---|---|
| Lever design | 3-finger brake lever |
| Mounting adapter | IS/PM universal mounting adapter |
| Brake pad material | semi-metallic material |
|---|---|
| Brake construction | high-quality aluminum alloy material |
| Piston configuration | dual piston braking |
| Brake fluid | mineral oil fluid(pre bled) |
What to know before buying
- Before fitting, check hose reach, handlebar diameter and caliper mounting compatibility. The listing warns not to remove the red pad-protection plate and press the lever before installation, as it may cause oil leakage. It also claims the brakes are pre-bled and ready to install.
Who is it for?
A good fit for
- Riders replacing a hydraulic brake pair who can confirm the stated hose lengths and mounting fit.
- Buyers looking for a set with a left-front, right-rear lever layout and pre-bled mineral-oil system.
Less suited to
- Buyers who need confirmed fitment without checking their frame, fork, rotor and handlebar specifications.
- Riders who require a particular hose length, lever layout or included hardware not specified in the listing.

Customer reviews on Amazon
- 5 stars
68% 68% - 4 stars
9% 9% - 3 stars
3% 3% - 2 stars
0% 0% - 1 star
20% 20%
The listing provides aggregate ratings with a generally positive skew but also a notable one-star share. This gives only a broad, mixed signal and does not explain customer experiences or establish performance. For a safety-critical replacement, confirm fit and installation requirements rather than relying on the overall rating.
Frequently asked questions
Which side operates the front brake?
The listing specifies the front brake on the left and the rear brake on the right.
How long are the brake hoses?
The listed lengths are 800mm/31.5inch for the front and 1500mm/59.1inch for the rear. Check that these suit your bike and routing.
Does the set arrive bled?
The listing says it uses mineral oil and is pre-bled. It also warns not to remove the red pad-protection plate and press the lever before installation, as this may cause oil leakage.
What should I check before buying?
Confirm 22.2 mm handlebar compatibility, hose reach and whether the stated IS/PM mounting adapter suits your frame, fork and brake setup.
























