Craft Resin CR-TABLE-TOP Table Top Epoxy Resin Kit, 4L

1 / 7

Product guide

Craft Resin CR-TABLE-TOP Table Top Epoxy Resin Kit, 4L

Craft Resin CR-TABLE-TOP is a 4L clear epoxy resin kit presented for coating table tops, bar tops, wood, furniture and artwork. Its listing describes a 1:1 mix, self-levelling application and a high-gloss finish, with a stated 3 mm recommended pour depth.

At a glance

The listing positions the kit for horizontal coatings such as table tops, bar tops, counters, wood and artwork.
The two-part resin and hardener are described as mixing at a 1:1 ratio.
Self-levelling and bubble-minimising behaviour are claimed, although the product guidance says some bubbles may need heat-gun or torch treatment.
The product description claims a clear, high-gloss finish with UV and scratch resistance.

Price

£59.48Save 21%

Reference price: ~~£74.99~~

Price checked: 12 Nov 2026

View offer Ahead of Black FridayExplore the selection

Often bought together

Craft Resin Deep Pour Epoxy Resin Kit, 5 cm Pours, Crystal Clear, 6L | Bubble Free, UV Resistant & Low Viscosity Casting Resin Epoxy for River Tables, Wood, Flower Preservation & DIY Crafts

£84.99

Resiners 2IN W x 60FT L Green Resin Tape for Epoxy Resin Molding | Thermal Adhesive Tape, UV Resistance, High Temperature Resistance, Easy Peel-Off, for River Tables, Remove Residue

£7.64

Pros and cons

Pros

A 1:1 mix and stated 3 mm pour depth give buyers useful application parameters for coating projects.
The described use cases cover furniture and countertop coatings as well as canvas and craft projects.
Customer feedback reports ease of mixing and pouring and positive impressions of the finish.

Cons

The listing says vertical edges may drip, so this self-levelling formula is primarily suited to horizontal surfaces.
The described working window is about 25 minutes at 25°C, leaving limited time to spread the mixed resin.
Customers report mixed experiences with the hardener yellowing over time.

Technical specifications

17 specifications

Identity
Brand	Craft Resin
Model	CR-TABLE-TOP

Materials and protection
Material listed	Epoxy Resin
Water resistance listed	Waterproof

Dimensions and installation
Weight listed	4 Kilograms
Mixing ratio	1:1
Recommended pour depth	3 mm
Mixed viscosity	3800 CPS

Use and curing
Full cure time listed	48 Hours
Working time at 25°C	about 25 minutes
Heat resistance claim	90°C
Post-cure for complete cure	21 days
Colour	Clear
Item form	Liquid
Compatible material listed	Wood
Container type	Bottle
Country of origin	China

What to know before buying

Listing details to confirm

The listing is inconsistent about cure timing: one claim says the surface cures within 36 hours, the specification states 48 hours, and guidance gives 24–48 hours for sanding or polishing plus 21 days for complete post-cure. It also advises avoiding prolonged sun exposure despite UV-resistance claims, and recommends heat-gun or torch use to address trapped bubbles. Food-contact claims are for indirect contact after full cure, not a general direct-food-contact guarantee.

What’s in the box

Included

Manual
Mixing stick
Pumps
Gloves
Spreader

Who is it for?

A good fit for

DIYers coating horizontal tables, bar tops, counters or wood furniture who can follow the stated mix ratio and pour-depth guidance.
Makers wanting a clear, glossy coating for artwork or home décor projects.

Less suited to

Projects needing a deep pour beyond the stated 3 mm recommended depth.
Vertical surfaces or edges where drips cannot be managed.
Buyers seeking a finish with no yellowing risk or a clearly stated single cure schedule.

Craft Resin CR-TABLE-TOP Table Top Epoxy Resin Kit, 4L · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.6 / 5 · 1,034 ratings

5 stars82%82%
4 stars8%8%
3 stars3%3%
2 stars2%2%
1 star5%5%

Customer feedback highlights ease of mixing and pouring, a pleasing finish and reports of bubble-free results, alongside reports that some hardener has yellowed over time. One customer described curing within 72 hours. These are customer experiences, not a consistent cure-time guarantee. For a clear coating where appearance matters, the yellowing reports are worth weighing against the listing’s UV-resistance claims and its advice to avoid prolonged sun exposure.

Positive themes

Customers report that the resin is easy to mix and pour.
Feedback praises the finish and includes reports of bubble-free results.

Negative themes

Some customers report that the hardener yellowed over time.

Mixed feedback

The reported cure experience includes a customer noting 72 hours, while the listing itself gives several different cure timings.

Frequently asked questions

What is the listed mixing ratio?

The listing specifies a 1:1 ratio for resin and hardener.

How thick should a pour be?

The product description recommends a pour depth of 3 mm. It is presented as a table-top coating rather than a deep-pour resin.

How long does it take to cure?

The listing gives conflicting timings: 36 hours, 48 hours and 24–48 hours for sanding or polishing. It also states that complete post-cure takes 21 days, so use the product instructions for the specific stage.

Can it be used on vertical surfaces?

The listing says it is designed to self-level on horizontal surfaces and may drip on vertical edges. Painter’s tape or thin coats are suggested to help control edges.

Is the cured surface suitable for food contact?

The listing claims suitability for indirect food contact after full cure. It does not establish suitability for direct food contact.