SUNLU PETG 2.0 Olive Green 3D Printer Filament, 1.75 mm

Printer: SUNLU PETG 2.0 Olive Green is a 1.75 mm filament for 3D printing, with the listing describing a lower-moisture formula and reduced stringing. Its stated impact figure and dimensional tolerance may interest buyers making functional parts, but remain manufacturer claims rather than independently verified results.

At a glance

The listing describes a PETG 2.0 formula intended to reduce moisture uptake, stringing and fuzzy surfaces.
SUNLU claims the filament can remain printable after being open at room temperature for 3 days, without emergency drying.
The stated notched impact strength is 5.196 KJ/m². The listing compares this with 3 KJ/m² for classic PETG.
The product details identify a 1KG olive green spool with 1.75 mm filament.

Price

£13.59Save 28%

Reference price: ~~£18.99~~

Price checked: 12 Nov 2026

View offer Ahead of Black FridayExplore the selection

Pros and cons

Pros

The 1.75 mm diameter and PETG material are clearly identified for buyers matching filament to a compatible printer.
The stated 1KG spool size and olive green colour make it straightforward to choose for a colour-specific project.
The listing provides a specific notched impact figure and dimensional tolerance for buyers considering functional prints.

Technical specifications

8 specifications

Identity
Brand	SUNLU
Model	Strong PETG 2.0 Filament 1,75 mm

Materials and protection
Material listed	SUNLU PETG2.0 Filament
Colour and spool size	1KG Olive Green
Diameter	1.75 Millimetres

Manufacturer-stated performance
Notched impact strength	5.196 KJ/m²
Dimensional tolerance	±0.03mm
Claimed open-air printability	3 days

What to know before buying

The manufacturer’s moisture, stringing, printability, strength and tolerance statements are claims, not independently verified performance. Printing results can depend on printer setup and conditions.

Who is it for?

A good fit for

3D printer owners seeking 1.75 mm PETG in olive green for decorative or functional prints.
Makers considering PETG for parts where the manufacturer-stated impact strength is relevant.
Users who want to try the listed reduced-moisture and reduced-stringing formulation.

Less suited to

Buyers whose printer requires a filament diameter other than 1.75 mm.
Anyone needing independently verified strength, moisture-resistance or print-quality results.

SUNLU PETG 2.0 Olive Green 3D Printer Filament, 1.75 mm · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 38 ratings

5 stars84%84%
4 stars5%5%
3 stars7%7%
2 stars4%4%
1 star0%0%

Aggregate ratings lean positive, with most falling in the five-star category, but a smaller number of lower ratings show that experiences are not uniform. The rating data gives no reasons for those differences, so it cannot establish print quality, moisture behaviour or strength. Buyers should treat the listing’s PETG 2.0 performance claims as manufacturer statements, particularly if predictable functional-part performance is essential.

Frequently asked questions

What diameter is this SUNLU filament?

The product details list a diameter of 1.75 Millimetres. Confirm that this matches your printer’s requirements.

How much filament is on the spool?

The colour listing states 1KG Olive Green.

What impact strength does SUNLU state?

The listing gives a notched impact figure of 5.196 KJ/m² and compares it with 3 KJ/m² for classic PETG. These are manufacturer claims, not independently verified measurements.

Does the listing say it needs drying before printing?

SUNLU claims the filament can print cleanly after being open at room temperature for 3 days without emergency drying. This is a manufacturer statement, not a guarantee for every storage or printing condition.