NANKADF DPS3010U 30V 10A Bench Power Supply

1 / 7

Product guide

NANKADF DPS3010U 30V 10A Bench Power Supply

The NANKADF DPS3010U is a variable benchtop DC supply rated for outputs up to 30V and 10A. Its display shows voltage, current and power, while encoder adjustment and USB-A/USB-C charging ports add useful controls and convenience for electronics work.

At a glance

Encoder controls are described as allowing coarse and fine adjustment of voltage and current.
The display is claimed to show voltage, current and power, with CC/CV state shown on screen.
USB-A and USB-C ports are claimed to provide up to 18W, depending on the connected device and charging protocol.
The manufacturer describes OCP output interruption and an alarm when enabled and a short circuit or set-current threshold is reached.

Price

£52.69Save 15%

Reference price: ~~£61.99~~

Price checked: 12 Nov 2026

View offer

Often bought together

Hejo 6PCS Multimeter Test Leads Set with Alligator Clips, Banana Plug Cable | Red and Black, 4 Pieces 4mm Pluggable Soft Test Leads, with 2PCS Measuring Tip, for Electrical Testing

£11.99

Pros and cons

Pros

Adjustable output up to 30V and 10A suits a range of low-voltage bench testing and repair tasks.
Coarse and fine encoder adjustment can make setting values more controlled than a single-step control.
USB charging ports can keep a compatible device powered without occupying a separate bench charger.

Cons

USB charging power is limited to a claimed maximum of 18W, and may be lower depending on the device and cable.

Technical specifications

18 specifications

Identity
Brand	NANKADF
Model	DPS3010U

Electrical
Maximum output voltage	30 Volts
Maximum output current	10 Amps
Maximum output power	300 Watts
Input voltage	230 Volts
Input supply specification	AC 230V/115V±10%; 50Hz/60Hz
USB connectors	USB Type A, USB Type C
USB charging power	up to 18W

Controls and protection
Display resolution	0.01V, 0.001A
Adjustment	Encoder adjustment knob
Operating modes	CC/CV automatic switching
Protection functions	overvoltage protection, current limiting protection, overheating protection, short circuit protection
Overcurrent protection	OCP

Dimensions and installation
Form factor	benchtop
Dimensions listed	22.5 x 9 x 14.5 centimetres
Weight	1.2Kg
Colour	Black

What to know before buying

Listing details to confirm

The listing gives both 230 Volts input and AC 230V/115V±10%; 50Hz/60Hz, so the supported input range and whether 115V operation applies to this UK listing are unclear. It also lists model DPS3010U but manufacturer part number DPS3010P. Verify the exact unit and supply requirements before purchase. USB charging may fall to standard 5V1A if the device or cable does not support fast charging.

What’s in the box

Included

Power supply
Output cable
Input cable
User manual

Who is it for?

A good fit for

Electronics hobbyists and repair benches needing adjustable DC output for testing or fault finding.
Users who want encoder-based voltage and current setting plus a display of several output parameters.

Less suited to

Buyers needing output above 30V or 10A.
Users who need a guaranteed fast-charge rate from the USB ports regardless of their device and cable.

NANKADF DPS3010U 30V 10A Bench Power Supply · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.7 / 5 · 197 ratings

5 stars84%84%
4 stars10%10%
3 stars3%3%
2 stars1%1%
1 star2%2%

Customer feedback reports that the supply works well, is straightforward to use and can be useful for fault finding. Those impressions are relevant to the listed adjustable output and encoder controls, but do not independently confirm the specifications or protection behaviour. Aggregate ratings lean strongly towards five-star feedback, though a smaller share of ratings is lower and the figures do not explain why.

Positive themes

Customers describe it as easy to use and report positive experiences with performance and functionality.
One customer use mentioned is fault finding.

Frequently asked questions

What output range is listed for the NANKADF DPS3010U?

The listing gives an output voltage up to 30 Volts and an output current up to 10 Amps, with maximum output power listed as 300 Watts.

Does it have USB charging ports?

Yes. USB Type A and USB Type C ports are listed, with charging power claimed up to 18W. Actual power depends on the connected device and cable.

What does the display show?

The manufacturer says it can display voltage, current and power, with stated resolution of 0.01V, 0.001A. These are listing claims rather than independently verified measurements.

What should UK buyers check about the input?

The product details state 230 Volts, while another specification gives AC 230V/115V±10%; 50Hz/60Hz. Check the input requirements for the selected unit before connecting it.