INNOVV Power Hub 3 Motorcycle Power Distribution System

System: The INNOVV Power Hub 3 is a 12V motorcycle power distribution hub for connecting up to five auxiliary devices. Its stated 15A total current and low standby consumption may suit riders adding several electrical accessories, though installation requires connecting it to the motorcycle battery.

At a glance

Designed to distribute motorcycle battery power to as many as five auxiliary devices.
The listing states a total current of 15A and DC 12V operation.
Claimed standby current is ≤10uA, with no-load power consumption of ≤0.2 W.
The manufacturer claims an IP67 waterproof rating.
Installation instructions describe connecting the hub's bucking module to the battery, then wiring auxiliary devices.

Price

£39.00Save 19%

Reference price: ~~£47.99~~

Price checked: 14 Nov 2026

View offer

Often bought together

INNOVV ThirdEYE Motorcycle Blind Spot System with Voice and Indicators Alert, Waterproof Moto Assistant System, Detect Hazard

£169.10

INNOVV K7 Motorcycle Dash Cam Front and Rear, 2K+2K Ultra HD Motorbike Camera, EIS Anti-Shake, 10Hz GPS, 5.8G WiFi, IP67 Wate

£290.00

Pros and cons

Pros

One hub is specified for connecting up to five motorcycle accessories.
The stated low standby current may be useful when the motorcycle is parked.
Customer feedback describes installation as simple, although fitting still involves battery wiring.

Cons

The stated 15A total current is shared across connected devices, so accessory loads need to be considered together.

Technical specifications

8 specifications

Identity
Brand	INNOVV TECH

Electrical and connectivity
Operating voltage	DC 12V
Total current	15A
Maximum connected devices	up to 5 devices
Standby current	≤10uA
No-load power consumption	≤0.2 W

Protection
Waterproof rating	IP67

Dimensions and installation
Dimensions listed	3 x 1 x 2 cm; 390 g

What to know before buying

The listing gives dimensions and weight together as “3 x 1 x 2 cm; 390 g” without clarifying which measurement applies to which dimension or confirming the weight separately. Check the physical fit and load requirements against your motorcycle and accessories before installation.

Who is it for?

A good fit for

Motorcycle owners adding several auxiliary electrical devices and looking to distribute power from the battery.
Riders who want a hub with a stated low standby current and an IP67 waterproof claim.

Less suited to

Anyone needing more than the stated 15A total current or a product with a verified compatibility list for specific accessories.

INNOVV Power Hub 3 Motorcycle Power Distribution System · photo 2 — Additional product photo 2

Customer reviews on Amazon

4.3 / 5 · 29 ratings

5 stars75%75%
4 stars3%3%
3 stars12%12%
2 stars5%5%
1 star5%5%

Customer feedback highlights good perceived product quality and straightforward installation. Those comments are relevant for riders wiring multiple accessories, but the stated battery connection means installation still involves motorcycle electrical work. Aggregate ratings are generally favourable but include lower ratings too, and they do not establish how the hub performs on a particular bike.

Positive themes

Customers describe the hub as good quality.
Customers report that it is simple to install.

Frequently asked questions

How many devices can the INNOVV Power Hub 3 connect?

The listing says it can connect up to five devices installed on a motorcycle.

What voltage and current does it specify?

The listing specifies DC 12V and 15A total current. The 15A figure is for the hub as a whole, not a separate rating for each device.

How is the hub installed?

The instructions describe connecting the end with the bucking module to the motorcycle battery and wiring the other leads to auxiliary devices. Confirm the installation suits your motorcycle and equipment.

Is the Power Hub 3 waterproof?

The manufacturer claims an IP67 waterproof rating. This is a listing claim, not an independently verified result.